Invisible Fixing Kits

The following system is designed to allow an oak beam to give the appearance that it is floating*

  • Limits any mess and hassle
  • Easy to fix and install
  • Supports different wall types
  • Fits most Beam up to 200mm x 200mm

This simple solution allows you to fix 2 small shaped oak plates to your wall to support the beam. Fixing these securely is paramount and the type of fixing (screw) you use will be dependent of the type of wall you are fixing to. We can provide advice if needed although the responsibility of ensuring a decent fix would be down to the installer. With the 2 supports in place, it is simply a matter of lifting the beam over and sliding down upon the supports. The reverse of the beam and supports have opposite chamfers causing the beam to ‘grip’.

Minimum dimensions for this fixing are a height of 140mm. Should your beam be under 1100mm, the dimensions indicated on the fixing kit instruction form need manually altering to suit your requirements.

 
Detailed Drawing Available Here