Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
  • Skirting Board
  • Underlays
  • Oils & Lacquers
  • Maintenance

"The finishing touches are as important as the ones you start with..."

Skirting Board

 

skirting boardWe manufacture our own lengths of skirting board, currently available in four different profiles.

 

Should your requirements be a little different we can normally satisfy most peoples needs.

 

Lengths are normally in excess of 2.0m and the norm tends to be 2.4m to 4.0m.

 

The height is 165mm although this can be reduced or increased if needed.

 

The profiles pictured as, from left to right:

 

Bullnose, Victorian, Torus and Regency.

 

 

 

 

 

Miscellaneous Items

Underlays

 

underlayQuick Therm

 

We provide different underlays for different applications.

 

The engineered oak flooring can be laid as a floating floor and an underlay is needed to iron out any irregularities in the sub floor and provide a smooth clean surface on which to lay the board.

 

The underlay shown to the right is only 1.8mm thick and has hundreds of small holes to allow heat from any under floor heating that may be installed. It has a very low 'tog' rating of 0.35 to allow the heat to be transferred.

 

 

 

 

 


Timber Tech

 

The black and silver underlay is designed to be laid on top of concrete, chipboard and other flat and level sub floors.

 

It has a high premium quality, 3 layer Rubber Foam Composite underlay combining the very best properties of EDPM-based rubber and non cross linked polyethylene foam.

 

A highly efficient metalised silver moisture proof membrane protects against moisture damage caused by residual dampness migrating from the sub floor.

 

Both underlays come in packs of 10 square meters.

Miscellaneous Items

Oils and Lacquers

 

Junkers ProTech Oil.

 

This is a durable and fantastic looking oil.

 

It is an oil-modified polyurethane lacquer for residential and commercial use. It primes & seals in one application with a superb colour enhancement & oiled appearance.

 

The Polyurethane gives durability & ease of maintenance and ideally apply 3 coats to get the best results.

 

Drying time 4 hours+ depending on temperature and humidity

 

Date Sheet Available Here

 

 

 

 

Junckers Rustic Oil

 

A coloured natural drying oil in low odour solvent.
.
Its appearance is a coloured liquid that dries to a transparent coloured surface.

2 coats are required and it is ready to use after 24 hours.


Fully cured after 3 days.


Lasts for 2 years if unopened and stored at 20°C.


Once opened the oil will start to form a skin and may harden.

 

Data Sheet Available Here

 

 

Water Based Lacquer

 

Normally sold as an ULTRAMATT COLOURLESS lacquer.

 

This product is as close as it gets to getting your oak flooring to look as if it was uncoated.

 

It is a water based product and quicker drying than the oils above.

 

If you prefer the 'natural' sanded look, this is ideal.

 

 

 

Data Sheet Available Here

 

Maintenance

 

This process can be applied to your floor whether you have got the polyuethane oil or water based matt lacquer finish.

 

Each household and room will attract different levels of wear and as such, the frequency of each step below, should be taken as a guide only. If youv have any questions, please do not hesitate to get in touch by calling us on 01423 593794.

 

Step 1 - Daily

 

Vaccuum the floor as you would a carpet and as frequently as needed. This will remove any small particles that may cause scratches to your floor.

 

Step 2 - Weekly or Fortnightly

 

Mix one cap ful of Junckers Cleaner to 5 litres of warm water. The small one litre bottle will make up 50 litres of cleaning solution.

 

The solution should be applied using a well wrung out cloth or mop. A 'Mop Kit', as pictured, bottom left, is available with a towel applicator, pad, handle and 1 litre of pre-mixed cleaner.

 

For further information, you can download a data sheet here

 

Step 3 - Every 3-6 months

 

Your floor may over time, develope scrates and require a top up. There are two products that will freshen your floor, available in a satin or matt finish. Both products are water based and easy to apply.

 

For the technical data sheet for these products please click here for Matt and here for Satin.

 

 

 

Step 4 - Every 1-2 years

 

Your floor will eventually require resealing with another coat of the original product we supplied. With your oak floor, you can resand the floor and apply a different finish if you require.

 

Further information on these finishing products can be found be clicking the 'Oils and Lacquers' tab at the top of this page.